UPDATED 08-OCT-2018
 |
| RailCore II |
A friend of mine has asked if I could help him out and print the parts for a RailCore II - ZL out of PETG, so here is the start of the adventure.
The original files can be found here:
RailCore II - Thingiverse Files
AND:
RailCore II - XL Option Thingiverse
 |
| RailCore II - ZL |
The choice of Filament is eSun PETG in SOLID BLUE, and it looks amazing..
The big issue was getting the settings right for my GeeeTech A10. It took some time and a small bag of failed prints..
But I finally got it sorted. And I'm getting consistent prints.
Printer Settings:
First Layer:
Temp -Nozzle 240c
- Bed 80c
Speed - 15mm/sec (to get bed adhesion)
Rest of Print:
Temp -Nozzle 235c
- Bed 80c
Speed - 35mm/sec
THE PARS PRINT LIST
| | |
| Name |
Qty |
|
Notes |
| Z_Bracket_Top |
3 |
3 |
Completed |
| Z_Bracket_Bottom |
3 |
3 |
Completed |
| Front_Stationary_Idler_Carrier |
1 |
1 |
Completed |
| Back_Stationary_Idler_Carrier |
1 |
1 |
Completed |
| Idler_Spacer |
2 |
2 |
Completed |
| Front_Motor_Mount |
1 |
|
Printing |
| Back_Motor_Mount |
1 |
|
Printing |
| Back_X_Carriage |
1 |
1 |
Completed |
| Front_X_Carriage |
1 |
1 |
Completed |
| Belt_Retainer_Clip |
4 |
4 |
Completed |
| Y_Carriage |
1 |
1 |
Completed |
| E3DV6_Groove_Mount |
1 |
1 |
Completed |
| E3DV6_Groove_Mount_Retainer |
1 |
1 |
Completed |
| Y_Endstop_Mount |
1 |
1 |
Completed |
| X_Endstop_Mount |
1 |
1 |
Completed |
| Cooling_Shroud |
1 |
1 |
Completed |
| IR_Probe_Mount OR
BLTouch_Mount |
1 |
1 |
Completed |
| Electronics_Box_Corner |
4 |
4 |
Completed |
| Titan_Mount |
1 |
1 |
Completed |
| Filament_Guide |
1 |
1 |
Completed |
| ZL_Z_Yoke_2 |
2 |
2 |
Completed |
| ZL_Z_Yoke_1 |
1 |
1 |
Completed |
| ZL_Foot |
4 |
4 |
Completed |
| ZL_Foot_Pad (Optional) |
4 |
4 |
Completed |
| Rail_Alignment_Tool |
2 |
2 |
Completed |
X_Carriage_Insert
Bearing_Block |
2
4 |
2
4 |
Completed
Completed |
|
|
48 |
PRINTED |
| Total |
50 |
2 |
LEFT TO BE PRINTED
|
|
| | | |
 |
| Front and Back Stationary Idler Carrier - 50mins each |
 |
| Front and Back X Carriage - 1.2Hr each |
 |
| Z Bracket Top X3 - 1.2Hrs each |
 |
| Z Bracket Bottom X3 - 1.2Hrs each |
 |
| BEARING BLOCK X4 |
I didn't find the Bearing Block in the Printing BOM but I made them as I think they are needed..
 |
| X Carriage Insert X2 |
 |
| Belt Retainer Clip X4 |
 |
| Idler Spacer X2 |
 |
| Cooling Shroud |
 |
| Y Carriage |
 |
| ZL Z Yoke 1 and 2 |
 |
| ZL Foot Pad x 4 |
 |
| E3DV6 Groove Mount and Retainer |
 |
X and Y Endstop Mounts
 |
| Electronics Box Corners |
|
 |
| BL Touch Mount |
 |
| IR Probe Mount |
 |
| Filament Guide |
 |
| Titan_Mount |
 |
| Rail Alignment Tool |
EXTRA PARTS
 |
Fan Cover
 |
Thumb Wheels
 |
| PSU Cover |
|
|
So for now It's going well and I will keep adding Pic's as I go..
TO BE CONTINUED...................
I'm Printing all of these part on my GeeeTech A10.
If you are interested in purchasing one,
Click Here > GearBest - Geeetech A10 Quickly Assemble 3D Printer 220 x 220 x 260mm
Printer Settings:
